Description
Homberg & Brusius TRM-2A: rock tumbler with two barrels
The Homberg & Brusius TRM-2A is a dual rock tumbler for grinding and polishing stones and other suitable small materials. The machine has two separate white rubber barrels, a steel housing and a simple mechanical drive.
Each barrel has a capacity of 0.7 litres and, with a suitable fill, can process approximately 850 grams of stones . With both barrels running at the same time, you therefore have a practical total capacity of approximately 1.7 kilograms of stones.
- 2 × 0.7 litres white rubber barrel
- Approximately 850 grams of stones per barrel
- Approximately 1.7 kg total practical capacity
- Steel machine housing
- Designed by the manufacturer for long-term continuous use
- Declared power consumption of 32 watts
- Produced in Germany by Homberg & Brusius
The two separate barrels make it possible to process different stone types, batches or materials at the same time while keeping them fully separate from one another.
Two separate barrels for more flexibility
The main difference compared with a single-barrel rock tumbler is that the TRM-2A has two separate barrels. Each barrel can be filled independently.
In practice, this gives you several options. For example, you can:
- grind two different types of stone at the same time;
- process stones with different hardnesses separately;
- run two different batches independently;
- start a new batch while a previous batch is still running;
- keep smaller batches separate;
- use only one barrel temporarily when you have less material.
For anyone who tumbles stones regularly, a dual machine therefore offers extra flexibility above all else. You are not dependent on one barrel for all ongoing projects.
Robust and simple machine design
For long grinding processes, it is especially important that a machine can keep running for several days in a row.
The TRM-2A consists of a steel machine housing with simple mechanical controls. The machine is operated directly with an on/off switch and has no complicated digital programming.
The drive uses a toothed V-belt. The construction is relatively straightforward, so mechanical parts remain accessible for maintenance and possible replacement.
White rubber barrels
The TRM-2A is supplied with two white rubber barrels. Rubber helps dampen the sound of rolling stones compared with a hard plastic barrel.
The manufacturer states a noise level of approximately 52 dB . How loud the machine is in actual use also depends heavily on the stones used, the fill level, the surface and the room in which the machine is placed.
The white colour can be an advantage in certain applications where dark rubber residue is undesirable. Do bear in mind, however, that grinding slurry, stone dust and signs of use are more visible on white rubber than on a black barrel. The inside may therefore discolour after use. This is primarily cosmetic and does not automatically mean that the barrel is technically worn out.
The inside of the barrels has a wave-shaped profile. This helps lift the material as it turns and lets it roll back down again, creating the grinding action.
What do you need to tumble stones?
The standalone TRM-2A comes with the machine and both barrels. To grind and polish stones, you will also need suitable consumables.
- Rough stones that are suitable for tumbling
- Grinding powders in suitable grit sizes
- A suitable polishing compound for the final finish
- Optionally ceramic or other suitable filler media to maintain the desired batch volume
Which grinding media, grit sizes and polishing compounds work best depends, among other things, on the type of stone, hardness, original shape and the desired final result.
Always clean the stones, barrel, lid rim and any tools used carefully between different grinding stages. Leftover coarse grit can cause scratches again in a finer stage.
Designed for long-term use according to the manufacturer
Grinding and polishing stones is a slow process. A batch may run in the same grinding stage for several days in a row.
Homberg & Brusius states that the TRM series is designed for continuous use. The combination of a metal machine base, simple mechanical drive and rubber barrels makes the TRM-2A suitable for users who want to process batches regularly.
Declared power consumption of 32 watts
Homberg & Brusius states a power consumption of 32 watts for the complete TRM-2A. This is the manufacturer’s stated figure for the full machine, not 32 watts per barrel.
Actual consumption may vary in practice due to, among other things, load, mechanical resistance and mains voltage.
Who is the TRM-2A suitable for?
The TRM-2A is mainly intended for users who want to process two separate batches at the same time and value a simple mechanical design.
- hobbyists who tumble stones regularly;
- mineral collectors and gemstone enthusiasts;
- people who want to process stones they have found themselves;
- jewellery makers and goldsmiths;
- schools and educational projects;
- creative studios and workshops;
- associations and geological clubs;
- users who want to run two separate batches side by side.
Anyone who only wants to try a small amount of stones occasionally may be fine with a simpler or single-barrel model. The TRM-2A is mainly practical when both separate barrels are actually used.
Not just for stones
Although the TRM-2A is Rocktumbler.nl mainly used for grinding and polishing stones, a barrel machine with suitable grinding and polishing media can also be used for other small materials and workpieces.
For example, think of:
- rough semi-precious stones;
- agate and jasper;
- quartz varieties;
- river stones and suitable pebbles;
- suitable minerals;
- small metal parts;
- precious metals and jewellery components;
- small workpieces that need smoothing or deburring.
Where possible, combine materials in one barrel with roughly the same hardness and similar properties. When very hard and soft stones are processed together, the softer stones can be damaged before the harder stones have been ground sufficiently.
Technical specifications of the Homberg & Brusius TRM-2A
| Product | Rock tumbler / stone polishing machine with dual barrels |
|---|---|
| Model | TRM-2A |
| Manufacturer | Homberg & Brusius |
| Origin | Germany |
| Number of barrels | 2 |
| Barrel material | White rubber |
| Inside of barrels | Wave-shaped profile |
| Capacity per barrel | 0.7 litres |
| Recommended amount of stones | Approximately 850 grams per barrel with a suitable fill |
| Total practical capacity | Approximately 1.7 kilograms of stones |
| Housing | Steel |
| Suitable for continuous use | According to the manufacturer: yes |
| Drive | Toothed V-belt |
| Operation | On/off switch |
| Supply voltage | 230 volts |
| Declared power consumption | 32 watts for the complete machine |
| Declared noise level | Approximately 52 dB |
| Dimensions | Approximately 40 × 15 × 16 cm |
| Weight | Approximately 3.6 kg |
What is included?
- Homberg & Brusius TRM-2A polishing machine;
- two white rubber barrels of 0.7 litres each;
- manufacturer instructions.
Please note: stones, grinding powders, polishing compounds and filler media are not included as standard with the standalone machine, unless this is expressly stated for the selected version.
Summary
The TRM-2A is a simple dual rock tumbler with two separate rubber barrels and a sturdy metal machine base.
The machine is especially practical for users who want to process two separate batches at the same time and value simple mechanical engineering and a compact dual-barrel system.






Reviews
There are no reviews yet.